 |
Purpose | |
To Bond and Waterproof and Suppress Dust
|
|
|
Introduction | | EnviRoad GardTM is a cationic modified petroleum resin
and asphalt emulsion to be used as a Dust Control that is
mixed with water then applied to the road. |
|
|
Dilution Ratio | |
EnviRoad GardTM is delivered in a liquid emulsion concentrate
which is diluted with COLD or WARM potable or
non-potable water. |
|
|
Dust Control | |
Dilute: 1 part EnviRoad GardTM to 5-8 parts water.
|
|
|
Application Rates | |
.25 to .50 diluted gallons per sq. yard. |
|
|
Procedure | |
Day 1: Initial Treatment
Apply at .50 gal. per sq. yd.
Let cure for 4-24 hours.
Day 7: Second Application
Apply at .50 gal. per sq. yd.
Let cure for 4-24 hours.
Day 21: Third Application
Apply at .25 gal. per sq. yd.
Let cure for 4-24 hours.
Follow-Up Application
Apply at .25 gal. per sq. yd.
Frequency contingent on traffic.
|
|
|
Cost | |
Labor cost and time are greatly reduced when using EnviRoad
GardTM |
