 |
General
This specification if for a polymer modified emulsion with wetting agents and long term diluting stabilizing agent to be used as an all weather road sealer and dust control. Material to be diluted with cold or warm potable or non-potable water.
Specification
|
MIN
MAX
Emulsion test
Viscosity Saybolt
Furol at 25 deg.c.Sec
0
150
Storage Stability test on Emulsion 1 day %-
1.0
Freeze cycle 3 cycle
pass
Specific Gravity
ASTM-D-244
0.96
1.06
Particle Charge Test
Positive
Ph
3.0
7.5
SARA 3 ingredient level
-
0
Appearance
Brown to light brown
Odor
No objectionable odor
Diluted Sieve test Cold Water Dilution stability test
4 parts water to 1 part max sieve #40
1.0
Residue Test:
TCLP inorganics analysis on metals must be below EPA maximum
Levels, land ll relationship test method analyzed 40 CFR, part 261
D004
-
5.0 PPM
D005
-
100.0 PPM
D006
-
1.0 PPM
D007
-
5.0 PPM
D008
-
5.0 PPM
D009
-
.2 PPM
D010
-
1.0 PPM
D011
-
5.0 PPM
Residue re-emulsi cation at 72 deg f
0
1.0
Residue by Evaporatio, % by wt.
30
35
Kinematic Viscosity, 60c, cst
100
|
